DOUBLE TOGGLE JAW CRUSHER
 

CPC DOUBLE TOGGLE JAW CRUSHERS are HEAVY DUTY EQUIPMENT designed to operate in the toughest of conditions. Over the years, this range of CPC Crushers has become the MOST RELIABLE PRIMARY JAW CRUSHERS available in the market.




SALIENT FEATURES:-



FIT AND FORGET: Once the machine has been securely installed the customer can afford to forget about the maintenance part of this machine. Nearly BREAKDOWN FREE, this machine is suited for continuous duty crushing operations.



MINIMUM JAW PLATE CONSUMPTION: The machine operates on the principle of crushing without rubbing. Hence the jaw plate consumption is very low.



HEAT TREATED HARDENED ALLOY STEEL SHAFT: The shaft becomes ultra-strong and wear-resistant.



LARGE OVERSIZED BEARINGS: So that the machine is able to handle shock loads, the bearings used are of much higher capacity than required by a similar sized machine.



PERFECT BEARING ALIGNMENT: The housings are bored in the Horizontal Boring Machines so that they are precisely aligned. Lapping is performed upon each housing to ensure full contact of the bearing and the housing.



STRESS RELIEIVED BODY AND PITMAN: All fabricated parts are STRESS RELIEVED in the HEAT TREATMENT FURNACE to remove weld stresses. This process makes the welding strong and the structure more stable.

»CPC Equipments Compay Brochure - English (3614 kb)   

»CPC Equipments Double Toggle Jaw Crusher Product Leaflet - English (857 kb)



TECHNICAL SPECIFICATIONS

 MODEL 
 NO 
MC SIZEMAX FEED SIZEOUTPUT SIZEMINIMUM JAW SETTINGMIN CRUSHING
CAPACITY
MAX CRUSHING
CAPACITY
MOTOR HPENGINE HPRPM
 HARD 
 STONE 
 SOFT 
 STONE 
 HARD 
 STONE 
 SOFT 
 STONE 
 HARD 
 STONE 
 SOFT 
 STONE 
2412DT24" x 12"10"10"75mm3"2"30 TPH50 TPH40 HP50 HP275300
2415DT24" x 15"12"12"125mm5"4"40 TPH60 TPH40 HP50 HP275300
3015DT30" x 15"12"12"75mm3"2"40 TPH100 TPH60 HP70 HP250275
3018DT30" x 18"14"15"100mm4"3"40 TPH100 TPH60 HP70 HP250275
3020DT30" x 20"15"17"150mm6"5"40 TPH100 TPH60 HP70 HP250275
3618DT36" x 18"15"16"75mm3"2"50 TPH150 TPH75 HP90 HP250275
3624DT36" x 24"18"20"125mm5"4"100 TPH150 TPH75 HP90 HP250275
4230DT42" x 30"24"26"150mm6"5"150 TPH200 TPH100 HP120 HP250275
4842DT48" x 42"34"36"150mm6"5"150 TPH250 TPH125 HP150 HP250275
THE CRUSHING CAPACITIES MENTIONED IN THE TABLE ABOVE ARE APPROXIMATE AND ARE BASED ON CONTINUOUS REGULAR FEED OF STONE OFULK DENSITY 1.6 TON/ CU-M. THE CAPACITIES MENTIONED ABOVE MAY VARY BASED ON THE TYPE OF FEED MATERIAL, CLAY AND MOISTURE CONTENT, BULK DENSITY, OUTPUT SIZE AND FRACTURE PROPERTIES OF THE BULK MATERIALS